The Hawke
Shot Saver can be used with any new or existing Hawke Riflescope.
Use the Shot Saver to (re)-check your zero each time you go out
shooting!
The Shot Saver
also helps to align the scope to the approximate zero when scopes
are removed and replaced during cleaning and maintenance.
The Shot Saver is
extremely useful when using and swapping multiple riflescopes with
multiple rifles, saving you time and shots whilst zeroing. By simply
attaching the Shot Saver to the correct Bore Stud and inserting this
into the barrel of your rifle you look through your riflescope and
line up the reticle with the recorded mark* on the Shot Saver grid
pattern.
Each grid square
is equal to 4” at 100yds.
*recorded when
you first zero your rifle & scope in the conventional way.
Studs Provided
- .30 calibre
- .32 calibre
- .338 calibre
- .35 calibre
- .375 calibre
- .44 calibre
- .45 calibre .177 calibre
- .22 calibre
- 6mm (.243) calibre
- .25 calibre
- 6.5mm calibre
- .27 calibre
- 7mm calibre
|
